Ferguson Ferguson TE20 Engine PARTS
We stock a wide range of high quality replacement tractor engine spare parts to suit Ferguson TE20 tractors. All parts come with an 18 months warranty. Our range includes; cylinder heads, gaskets, valves, engines, blocks, pistons, liners, piston rings, Seals, engine overhaul Kits, fuel pumps, oil pumps, crankshafts, engine bearings, oil filters, fuel filters, fuel pipes, manifolds, silencers and much more.
Cylinder Head Gasket
-
Head Gasket Set P3 Conversion suitable for Ferguson - Suitable for Perkins P3 & P3.144 Engines, Conversions on TE Fergusons * For earlier P3 Models, an extra Oil Hole may need to be punched in manually to the gasket. Please check upon receipt, or ask for advice prior to ordering.£39.00 Inc VAT £32.50 Exc VATIn stockPart No.8661
Studs Cylinder Head
-
Nut Cylinder Stud and Conrod suitable for Ferguson - Nut 7/16" UNF-HTSuitable For 8696 Cylinder Head Stud, A-856 Cylinder Head Stud & 7143 Conrod BoltMF50B Perkins A4.212 Engine - Rocker Arm Screw Nut.£1.08 Inc VAT £0.90 Exc VATIn stockPart No.50143
Cylinder Block Ancil
-
6 Volt Shim suitable for Ferguson - 6 Volt shim to fit between the starter motor and the bell housing as per original.£5.28 Inc VAT £4.40 Exc VATIn stockPart No.92095
Engine Kits
-
Engine Overhaul Kit- Perkins P3 Conversion suitable for Ferguson - For Conversions of Ferguson TE 20 Petrol Engines to Perkins P3 Diesel. * Please Note, Head Gasket "may" require Additional Oil Hole Stamping Kit Consisit of; 3 x Piston, Pin & Clips 3 x Piston Ring Set 3 x Finished Liner 1 x Top Gasket Set (P3... Show More£234.00 Inc VAT £195.00 Exc VATIn stockPart No.8662
Oil Lines
-
Oil Pressure Pipe suitable for Ferguson - Oil Pressure Pipe£18.00 Inc VAT £15.00 Exc VATIn stockPart No.7246
Cylinder Tools
-
Piston Ring Groove Cleaner suitable for Ferguson - For fast and reliable removal of Carbon & Glaze Deposits from Piston Ring Grooves. Suits Most Pistons between 51mm & 127mm Diameters. Each of our Exclusive Cleaners comes complete with 3 x 6 bladed cutters, covering most of the popular sizes !! Cutt... Show More£35.96 Inc VAT £29.97 Exc VATIn stockPart No.A-626
-
Piston Ring Compressor suitable for Ferguson - Piston Ring Compressor 150mm Depth with Dual Compression Belts Capacities from 60mm - 150mm£28.21 Inc VAT £23.51 Exc VATIn stockPart No.A-625
Crankshafts
-
TEA Petrol Crankshaft suitable for Ferguson - Crankshaft3/8 UNF Flywheel bolts x 4, 2 Dowl HolesNose Diameter: 28.5mmNose Narrow Length: 69.7mmMains: 2.479"/2.795"Conrods: 2.0861... Show More£293.52 Inc VAT £244.60 Exc VATIn stockPart No.92402
Conrod Bearings
-
Conrod Bearings Set Early P3 Conversion + 0.020" suitable for Ferguson - Early Thick Walled Bearings (+ 0.020" oversize)£20.52 Inc VAT £17.10 Exc VATIn stockPart No.8810B
-
Conrod Bearings Set Early P3 Conversion + 0.050" suitable for Ferguson - Early Thick Walled Bearings (+ 0.050" oversize)£20.52 Inc VAT £17.10 Exc VATIn stockPart No.8810E
-
Conrod Bearings Set Early P3 Conversion + 0.040" suitable for Ferguson - Early Thick Walled Bearings ( + 0.040" oversize)£20.52 Inc VAT £17.10 Exc VATIn stockPart No.8810D
-
Conrod Bearings Set Early P3 Conversion + 0.010" suitable for Ferguson - Early Thick Walled Bearings (+ 0.010" oversize)£20.40 Inc VAT £17.00 Exc VATIn stockPart No.8810A
-
Conrod Bearings Set Early P3 Conversion + 0.030" suitable for Ferguson - Early Thick Walled Bearings (+ 0.030" oversize)£20.52 Inc VAT £17.10 Exc VATIn stockPart No.8810C
-
Conrod Bearings Set Early P3 Conversion suitable for Ferguson - Early Thick Walled Bearings (Standard Size)£59.94 Inc VAT £49.95 Exc VATIn stockPart No.8810
Main Bearings
-
Main Bearing Set Standard Early P3 suitable for Ferguson - Early Flanged Bearings (Standard Size)Currently unavailablePart No.8811
-
Main Bearing Set +0.050" Early P3 suitable for Ferguson - Early Flanged Bearings (0.050" oversize)£35.34 Inc VAT £29.45 Exc VATIn stockPart No.8811E
-
Main Bearing Set +0.040" Early P3 suitable for Ferguson - Early Flanged Bearings (0.040" oversize)Currently unavailablePart No.8811D
-
Main Bearing Set +0.010" Early P3 suitable for Ferguson - Early Flanged Bearings (0.010" oversize)£78.00 Inc VAT £65.00 Exc VATIn stockPart No.8811A
-
Main Bearing Set +0.020" Early P3 suitable for Ferguson - Early Flanged Bearings (0.020" oversize)£78.00 Inc VAT £65.00 Exc VATIn stockPart No.8811B
Conrod Bushes
-
Small End Bush suitable for Ferguson - Semi-Finished.
O.D: 35.12mm.
I.D: 31.4mm.
Width: 26.8mm.
£3.00 Inc VAT £2.50 Exc VATIn stockPart No.7033
Conrod Bolts & Nuts
-
Nut Cylinder Stud and Conrod suitable for Ferguson - Nut 7/16" UNF-HTSuitable For 8696 Cylinder Head Stud, A-856 Cylinder Head Stud & 7143 Conrod BoltMF50B Perkins A4.212 Engine - Rocker Arm Screw Nut.£1.08 Inc VAT £0.90 Exc VATIn stockPart No.50143
Thrust Washers Crank
-
Thrust Washer suitable for Ferguson - Standard.£15.00 Inc VAT £12.50 Exc VATIn stockPart No.7232
Gears Crank
-
Cup and Shaft Assembly suitable for Ferguson - Cup and Shaft Assembly£15.60 Inc VAT £13.00 Exc VATIn stockPart No.7305
-
Flywheel Locking Tab suitable for Ferguson - Flywheel Locking Tab£1.80 Inc VAT £1.50 Exc VATIn stockPart No.7084
Crankshaft Seals
-
Seal Crank Shaft suitable for Ferguson - Seal Crank Shaft£6.32 Inc VAT £5.27 Exc VATIn stockPart No.7027
Timing Chains
-
Timing Cover Gasket suitable for Ferguson - Timing Cover Gasket£3.60 Inc VAT £3.00 Exc VATIn stockPart No.5333
Bottom Gasket Sets
-
Bottom Gasket Set suitable for Ferguson - 83386 Suitable for Perkins P3 engines or for Ferguson TE20 tractors converted to a P3£22.20 Inc VAT £18.50 Exc VATIn stockPart No.74990
Air Intake
-
Air Breather Hose suitable for Ferguson - Air Breather Hose
Requires Hose Clips: 2 x A-722
£5.94 Inc VAT £4.95 Exc VATIn stockPart No.6252 -
Air Hose suitable for Ferguson - Requires Hose Clips: 2 x A-725
£11.68 Inc VAT £9.73 Exc VATIn stockPart No.50100
Fuel Taps
-
Ferguson TE20 Fuel Tap Gasket suitable for Ferguson - Ferguson TE20 Fuel Tap Gasket£1.79 Inc VAT £1.49 Exc VATIn stockPart No.81138
-
Fuel Tap & Bowl suitable for Ferguson - Exclusive To Agriline.Currently unavailablePart No.6132
-
Fuel Tap and Bowl suitable for Ferguson - Tap and Bowl
Requires Adapter 7844 when used with FE35 23CRequires Adapter 7830 when used with 35 Petrol, FE35 Petrol, TE20, TEA20Tank fitting thread 5/8" 18TPI£30.00 Inc VAT £25.00 Exc VATIn stockPart No.7829 -
Fuel Tap & Bowl suitable for Ferguson - Comes With Pipe Fitting. Thread Into Tank: 1/4 NPT£33.00 Inc VAT £27.50 Exc VATIn stockPart No.7831
-
Fuel Tap & Bowl Clip suitable for Ferguson - Clip Assembly ONLY.Currently unavailablePart No.6134
Fuel Pipes
-
Fuel Pipe Fitting suitable for Ferguson - BOM Component
Female Thread: 7/16" UNS.
Male Thread: 1/8" BSPT.£7.80 Inc VAT £6.50 Exc VATIn stockPart No.7830 -
Fuel Pipe - Tap to Carb (Petrol) suitable for Ferguson - Fuel Tap Fitting 1/4" BSPT£17.99 Inc VAT £14.99 Exc VATIn stockPart No.7175
Fuel Tanks
-
Petrol Tank suitable for Ferguson - 9623 Superb Quality. Exclusive To Agriline.£210.00 Inc VAT £175.00 Exc VATIn stockPart No.21371
Fuel Ancillaries
-
Fuel Bowl Rubber Washer suitable for Ferguson - Fuel Bowl Rubber Washer for 5410 Lift Pump38mm x 54mm x 2mm£3.60 Inc VAT £3.00 Exc VATOut of stockPart No.7146
-
Glass Bowl- Fuel Tap suitable for Ferguson - 1004498M1 1004498V1 0995260 For use with 6132£4.79 Inc VAT £3.99 Exc VATIn stockPart No.6135
Throttle Levers
-
Throttle Lever suitable for Ferguson - Chrome. Early models where lever connects to a rod with ball joints, and then to the circular disc. Up to serial number 200,000.£18.00 Inc VAT £15.00 Exc VATIn stockPart No.5630A
-
Throttle Lever suitable for Ferguson - Chrome. Later models where lower part connects to a flat bar, then to the circular disc from serial number 200,001.£18.00 Inc VAT £15.00 Exc VATIn stockPart No.5630
-
Throttle Lever (P3 Conversion) suitable for Ferguson - 7266 Throttle Lever suitable to TE20 Models with P3 conversions.Shaft Length: 230mmHandle Length: 195mm£18.00 Inc VAT £15.00 Exc VATIn stockPart No.75088
Carburettor Repair
-
Carburettor Gaskets suitable for Ferguson - 825959M1 58532 Suitable for Marvel, Zenith 28G & 24T2 Carburettors.£1.80 Inc VAT £1.50 Exc VATIn stockPart No.75585
-
Carburettor Repair Kit suitable for Ferguson - Marvel Carburettor.£30.00 Inc VAT £25.00 Exc VATIn stockPart No.7313
-
Carburettor Gaskets suitable for Ferguson - Marvel Carburettor.£1.50 Inc VAT £1.25 Exc VATIn stockPart No.74159
Exhaust Elbow
-
Elbow Exhaust suitable for Ferguson - Requires 1 x 5003 Gasket.£21.60 Inc VAT £18.00 Exc VATIn stockPart No.4102
Gasket Exhaust Elbow
-
Gasket Elbow suitable for Ferguson - Use With 4102 & 4103 Exhaust Elbow. UK Made.£2.28 Inc VAT £1.90 Exc VATIn stockPart No.5003
Exhaust Clamp
-
Exhaust Clamp suitable for Ferguson - Exhaust Clamp£5.40 Inc VAT £4.50 Exc VATIn stockPart No.4100
-
Exhaust Clamp suitable for Ferguson - Continental Engine.£9.00 Inc VAT £7.50 Exc VATIn stockPart No.4512
Silencer Pipe
-
Silencer suitable for Ferguson - Sand textured finish.
Use 5004 Weather Cap
£41.99 Inc VAT £34.99 Exc VATIn stockPart No.3183 -
Silencer suitable for Ferguson - For Horizontal Applications, for straight up systems (Vertical) use ref 3184.£21.60 Inc VAT £18.00 Exc VATIn stockPart No.3200
-
Exhaust Down Pipe suitable for Ferguson - Exhaust Down Pipe£17.99 Inc VAT £14.99 Exc VATIn stockPart No.3199
-
Silencer suitable for Ferguson -
Replacement part for Masse... Show More
£35.99 Inc VAT £29.99 Exc VATIn stockPart No.3189 -
Silencer suitable for Ferguson - Silver.
Use 5004 Weather Cap
£23.28 Inc VAT £19.40 Exc VATIn stockPart No.3184 -
Silencer Kit suitable for Ferguson - Kit Contains: 1 x Horizontal Silencer. 1 x Down Swept Pipe. 1 x Gasket. 1 x Pipe to Silencer Clamp. 1 x Horizontal Silencer Bracket.£41.99 Inc VAT £34.99 Exc VATIn stockPart No.3210
Exhaust Weather Cap
-
1.5" Weather Cap suitable for Ferguson - 1.5" Weather Cap£7.80 Inc VAT £6.50 Exc VATIn stockPart No.5004