John Deere 3010 Series 3210 Engine PARTS
We stock a wide range of high quality replacement tractor engine spare parts to suit John Deere 3210 tractors. All parts come with an 18 months warranty. Our range includes; cylinder heads, gaskets, valves, engines, blocks, pistons, liners, piston rings, Seals, engine overhaul Kits, fuel pumps, oil pumps, crankshafts, engine bearings, oil filters, fuel filters, fuel pipes, manifolds, silencers and much more.
Cylinder Head Gasket
-
£58.80 Inc VAT £49.00 Exc VATIn stockPart No.50370 -
£38.40 Inc VAT £32.00 Exc VATIn stockPart No.74996
Rocker Cover Gaskets
-
£12.00 Inc VAT £10.00 Exc VATIn stockPart No.1605
Valve Springs
-
Valve Spring suitable for John Deere tractor Valve Spring, can be used with both INLET and EXHAUST valve.Overall length - 55cmOverall diameter - 35mm£4.32 Inc VAT £3.60 Exc VATIn stockPart No.1495
Valve Collets
-
Valve Collet (Pair) suitable for John Deere tractor Valve Collet (pair)£1.50 Inc VAT £1.25 Exc VATIn stockPart No.7407
Valve Ancillaries
-
£3.00 Inc VAT £2.50 Exc VATIn stockPart No.1616 -
Valve Tappet suitable for John Deere tractor Valve Tappet£7.20 Inc VAT £6.00 Exc VATIn stockPart No.1502 -
Valve Stem Cap suitable for John Deere tractor Valve Stem Cap£3.60 Inc VAT £3.00 Exc VATIn stockPart No.1496
Studs Cylinder Head
-
Cylinder Head Stud (Pack of 9) suitable for John Deere tractor 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VATIn stockPart No.1464 -
Cylinder Head Stud - 112MM suitable for John Deere tractor 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VATIn stockPart No.1464A
Cyl Block Gaskets
-
Complete Gasket Set suitable for John Deere tractor Complete Gasket Set£65.99 Inc VAT £54.99 Exc VATIn stockPart No.50371
Oil Cooler
-
Oil Cooler suitable for John Deere tractor 1140 - From Serial Number 704046. 2850 - From Serial Number 795107. 3200 - From Serial Number 189846. 3300 - From Serial Number 189846. 3400 - From Serial Number 189846.£93.60 Inc VAT £78.00 Exc VATIn stockPart No.8089
Oil Pumps
-
Oil Pump Assembly suitable for John Deere tractor 3 Bolt fixing with modification Pipes to suit Pumps that were originally 4 Bolt£137.28 Inc VAT £114.40 Exc VATIn stockPart No.1505 -
Oil Pump Assembly suitable for John Deere tractor Later version Oil Pump with 4 Bolt Holes£59.88 Inc VAT £49.90 Exc VATOut of stockPart No.1504 -
Oil Pump RE504914 suitable for John Deere tractor Oil Pump Suitable for John Deere tractors oem number RE502269Show More£77.82 Inc VAT £64.85 Exc VATIn stockPart No.75570
£123.38 Inc VAT £102.82 Exc VATIn stockPart No.75571
Piston Engine
-
Piston, Ring & Liner Kit suitable for John Deere tractor Includes Liner O-Rings.£84.00 Inc VAT £70.00 Exc VATIn stockPart No.4770 -
Piston, Pin & Clips suitable for John Deere tractor Crown diameter: 105.870mm.Skirt diameter: 106.390mm.Compression height: 66.306mm.Overall height: 112.020mm.Chamber diameter: 58.360mm.Chamber depth: 18.800mm.Pi... Show More£42.96 Inc VAT £35.80 Exc VATIn stockPart No.1442
Piston Rings Engine
-
Piston Ring Set suitable for John Deere tractor No. of Rings = 3 (2.97 x 2.36 x 3.45)£18.00 Inc VAT £15.00 Exc VATIn stockPart No.1443 -
Piston Ring Set suitable for John Deere tractor For use with Piston 1600.£16.80 Inc VAT £14.00 Exc VATIn stockPart No.1601
Liners Engine Cyl
-
Liner C/W Seals suitable for John Deere tractor Finished Liner. Basic Specifications: Bore Dia 106.508 mm Height 196.930 mm. Comes with Sealing Rings. Wet Liner£33.60 Inc VAT £28.00 Exc VATIn stockPart No.1444 -
Liner C/W Seals - R116397 suitable for John Deere tractor Liner which comes with sealing rings.Dimensions as follows -Bore diameter - 106.27mmFlange diameter - 125.80mmOverall height - 218.86mmFlange width - 9.75mmO... Show More£47.99 Inc VAT £39.99 Exc VATIn stockPart No.1604
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere tractor Contains 3 Seals to Suit Liners 1444 & 1604£3.20 Inc VAT £2.67 Exc VATIn stockPart No.1450
Sump Gaskets
-
Sump Gasket Paper suitable for John Deere tractor Paper Alternative to 1481 (Cork)£7.20 Inc VAT £6.00 Exc VATIn stockPart No.1483 -
Sump Gasket Cork suitable for John Deere tractor Cork Alternative to 1483 (Paper)£8.40 Inc VAT £7.00 Exc VATIn stockPart No.1481
Crankshafts
-
Crankshaft RE50618 suitable for John Deere tractor Genmot Crank Shaft suitable for John Deere *NOTE - Crankshaft will require cleaning to remove any rust preventative prior to fitting*£570.00 Inc VAT £475.00 Exc VATIn stockPart No.1621
Conrod Bearings
-
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, + 0.030" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1488C -
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, + 0.010" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1488A -
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£5.40 Inc VAT £4.50 Exc VATIn stockPart No.1488 -
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, + 0.020" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1488B
Main Bearings
-
Main Bearing Pair suitable for John Deere tractor Flanged Bearing With Intergrated Thrust - STD.£17.40 Inc VAT £14.50 Exc VATIn stockPart No.1486
Conrods
-
Conrod suitable for John Deere tractor *Serial Number Break Applies Please View Details*. John Deere. 2040S - From Serial Number 430000. 2650 - Suitable For Collar Shift Transmission Only. 3350 - Upto Serial Number For Spanish Built Models.Pin size - 35mm£66.00 Inc VAT £55.00 Exc VATIn stockPart No.1489
Conrod Bushes
-
Small End Bush suitable for John Deere tractor Small End Bush£4.80 Inc VAT £4.00 Exc VATIn stockPart No.1462
Conrod Bolts & Nuts
-
Connecting Rod Bolt suitable for John Deere tractor 59mm Long. Note, some John Deere Connecting Rod Bolts were set at 54mm£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1491 -
CONROD BOLT - R501124 suitable for John Deere tractor Conrod Bolt.Dimensions as follows -Length - 61mmThread - M12 x 1.25£3.60 Inc VAT £3.00 Exc VATIn stockPart No.76395
Crankshaft Seals
-
Front Crank Seal suitable for John Deere tractor Front Crank Seal£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1460 -
Rear Crank Seal suitable for John Deere tractor Rear Crank Seal£21.60 Inc VAT £18.00 Exc VATIn stockPart No.1461
Fly Wheel
-
Fly Wheel Ring Gear suitable for John Deere tractor Fly Wheel Ring Gear£46.80 Inc VAT £39.00 Exc VATIn stockPart No.72514
Camshaft
-
£134.40 Inc VAT £112.00 Exc VATIn stockPart No.7586
Camshaft Followers
-
£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1503
Bottom Gasket Sets
-
£90.00 Inc VAT £75.00 Exc VATIn stockPart No.2552
Air Filters
-
Air Filter- Outer suitable for John Deere tractor Length: 356.4mm.
I.D: 90.5mm.
O.D: 165.1mm.
Currently unavailablePart No.1592 -
Air Filter- Inner suitable for John Deere tractor Length: 355mm.
I.D: 81mm.
O.D: 98.4mm.
£26.66 Inc VAT £22.22 Exc VATIn stockPart No.1593
Oil Filters
-
Oil Filter Spin On suitable for John Deere tractor Length: 136.7mm.Diameter: 94.1mm.£7.10 Inc VAT £5.92 Exc VATIn stockPart No.8493
Fuel Filters
-
Fuel Filter suitable for John Deere tractor Baldwin Filter.Currently unavailablePart No.8494 -
Fuel Filter 5 Micron Final Filter suitable for John Deere tractor Secondary Fuel/Water Coalescer Element with Drain.Currently unavailablePart No.1585 -
Fleetguard FS19831 Fuel Filter suitable for John Deere tractor Overall height: 135mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£26.40 Inc VAT £22.00 Exc VATIn stockPart No.FS19831 -
Fleetguard FS19838 Fuel Filter suitable for John Deere tractor Overall height: 116mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£23.12 Inc VAT £19.27 Exc VATIn stockPart No.FS19838
Fuel Lift Pumps
-
Fuel Lift Pump w/ Glass Bowl suitable for John Deere tractor Fuel Lift Pump w/ Glass BowlGasket Included£23.99 Inc VAT £19.99 Exc VATIn stockPart No.55008
Fuel Injectors
-
Injector Line Seal suitable for John Deere tractor I/D Ø : 6.2mm
O/D Ø : 10.5mm
Height : 5.8mm£0.24 Inc VAT £0.20 Exc VATIn stockPart No.1512 -
Fuel Injector RE36935 suitable for John Deere tractor Fuel InjectorInjector Nozzle marked with - 28480£58.80 Inc VAT £49.00 Exc VATIn stockPart No.9478A -
Fuel Injector RE60062 suitable for John Deere tractor Fuel Injector.Tee Connector Not Included.Suitable For Replacing Injectors With Injector Nozzle Number:- 28478 / 32262£42.00 Inc VAT £35.00 Exc VATIn stockPart No.1612 -
Injector Seal suitable for John Deere tractor Tee Fitting Washer.£1.08 Inc VAT £0.90 Exc VATIn stockPart No.1513
Fuel Ancillaries
-
Fuel Shut Off Solenoid suitable for John Deere tractor Fuel Shut Off SolenoidCurrently unavailablePart No.2074 -
Fuel Shut Off Solenoid suitable for John Deere tractor Fuel Shut Off Solenoid£21.00 Inc VAT £17.50 Exc VATOut of stockPart No.2073
Exhaust Manifold
-
Exhaust Manifold 4 Cylinder suitable for John Deere tractor Exhaust Manifold 4 Cylinder, Use Agriline Ref: 1507 for exhaust gasket.£180.00 Inc VAT £150.00 Exc VATIn stockPart No.92092