John Deere 40 Series, Classic 3040 Clutch PARTS
Here you will find our extensive range of clutch components for John Deere 3040 tractors. For most models of tractor, we provide our own brand of tractor clutch kits, clutch plates, PTO clutch packs and plates. We only supply the best quality release and pilot bearings. For modern tractors you will find clutch cables, clutch slave cylinders and clutch master cylinders. We also carry a wide range of LUK tractor clutch kits.
Clutch Fluid Reservoir
-
Clutch Fluid Reservoir - AL37471 suitable for John Deere tractor Clutch fluid reservoir. for tractors fitted with SG2 cab only.£34.80 Inc VAT £29.00 Exc VATIn stockPart No.76141
Clutch Kit
-
Clutch Kit 13" Split Torque suitable for John Deere tractor Clutch Plate is 13" / 330mm with 10 Splines 6 Paddles
Split Torque Clutch Cover 13" / 330mm Fixed torsion sprung PTO hub ; 1" 1/2 x 23 splines£441.60 Inc VAT £368.00 Exc VATOut of stockPart No.C0295 -
Clutch Kit With Bearings suitable for John Deere tractor 133060210 - Single Cover. 6 Bolt. 330mm. Diaphragm spring with release ring. Fixed torsion sprung PTO hub 1" 3/4 and 27 splines.
333004211 - Transmission Plate. 327mm. 10 Spline. Spline OD: 1 1/4". Torsion Sprung with compensating spring. 6 Pairs o... Show More£780.00 Inc VAT £650.00 Exc VATIn stockPart No.633112910 -
Clutch Kit With Bearings suitable for John Deere tractor This Kit Contains:- Clutch Cover: 133060210- Loose Disc: 333004211- Transmission Bearing: 510002110- Flywheel Bearing: 410002400- Hydraulic... Show More£900.00 Inc VAT £750.00 Exc VATIn stockPart No.633112936
Clutch Cover
-
Clutch Cover suitable for John Deere tractor Cover size: 330 Hole qty: 6 Spring qty: 1 Spline OD: 1"3/4 Spline Qty: 27 App Info: 2650, 2850, 3050 (inc Chassis No. upto 649119 with or without SG2 CAB) 2040 (Chassis No. upto 429999, 430000 onwards with & without powershaft) 2140 (Chassis... Show More£499.32 Inc VAT £416.10 Exc VATIn stockPart No.133060210 -
Clutch Cover suitable for John Deere tractor Split Torque Clutch Cover 13"
Fixed torsion sprung PTO hub ; 1" 1/2 x 27 splines£299.99 Inc VAT £249.99 Exc VATIn stockPart No.C0257
Main Drive Plate
-
Clutch Main Plate suitable for John Deere tractor Clutch Plate Size Is 13" / 330mm With 10 Splines 6 Paddles£141.60 Inc VAT £118.00 Exc VATOut of stockPart No.C0277 -
Clutch Plate suitable for John Deere tractor Trans Plate Size: 327 Spline OD: 1"1/4 Spline Qty: 10 Pad Qty: 6 2650, 2850, 3050 (inc Chassis No. upto 649119 with or without SG2 CAB) 2040 (Chassis No. upto 429999, 430000 onwards with & without powershaft) 2140 (Chassis No. 429999 with power... Show More£324.00 Inc VAT £270.00 Exc VATIn stockPart No.333004211
Release Bearing
-
Clutch Release Bearing suitable for John Deere tractor Bore 58.0mm OD 96.0mm Depth 57.4mm App Info: 2040 (Chassis No. 430000 Onwards) 2250 (Chassis No. upto 649118) 2650 (Narrow) 2650, 2850, 3050 (inc Chassis No. upto 649119 with or without SG2 CAB) 2040 (Chassis No. upto 429999, 430000 onwards with ... Show More£99.49 Inc VAT £82.91 Exc VATIn stockPart No.500024811 -
Clutch Release Bearing suitable for John Deere tractor Self Centering
ID - 49.50MM
OD - 96MM
Depth - 57mm£66.00 Inc VAT £55.00 Exc VATIn stockPart No.C0139
Clutch Pilot Bearing
-
Clutch Pilot Bearing 339932X1 suitable for John Deere tractorID: 15mmOD: 35mmWidth: 11mm£1.46 Inc VAT £1.22 Exc VATIn stockPart No.75788 -
Pilot Bearing suitable for John Deere tractor OD: 35mm. ID: 15mm. Depth: 11mm.£20.22 Inc VAT £16.85 Exc VATIn stockPart No.410002440
Master Cylinder
-
Clutch Master Cylinder suitable for John Deere tractor The Brake system must be fully flushed with new clean fluid to remove any residual contaminants that may be left in the system.
Warranty shall not be accepted for damaged seals due to contamination.£89.99 Inc VAT £74.99 Exc VATIn stockPart No.6946
Cylinder Repair Kits
-
£29.99 Inc VAT £24.99 Exc VATOut of stockPart No.74288 -
Clutch Master Cylinder Repair Kit suitable for John Deere tractor The Brake system must be fully flushed with new clean fluid to remove any residual contaminants that may be left in the system.
Warranty shall not be accepted for damaged seals due to contamination.£27.00 Inc VAT £22.50 Exc VATIn stockPart No.6947