John Deere 40 Series, Classic 3140 Front Axle & Steering PARTS
Our range of steering and axle parts for John Deere 3140 tractors will get you heading in the right direction. Robust original quality steering joints and track rod ends are stocked along with kingpins, spindles, wheel bearings, axle seals, bushes, bearings, wheel hubs, repair kits, wheel nuts, power steering pumps, orbital units, hoses, steering boxes, seal kits, drive shafts, wheels and tyres.
Front Mudguard
-
Front Mudguard Kit suitable for John Deere tractor Front Mudguard Kit,Suitable for a wide range of John Deere tractors.Note that this kit secures onto the tractors original mudguard casting (see images). If your machine is missing this part then please or... Show More£330.00 Inc VAT £275.00 Exc VATOut of stockPart No.76185Front Mudguard Kit suitable for John Deere tractorFront Mudguard Kit,Suitable for a wide range of John Deere tractors.Note that if you machine already has the cast bracket mount installed yon can use Agriline Kit 76185
Show More Out of stockPart No.76187
Wheel Rims
-
Wheel Rim 4.50 x 16 suitable for John Deere tractorFits tyre size - 6.00 x 16.For best fit use with Agriline tyre ref. T-002 6.00 x 16 and inner tube ref. T-006.Agriline wheels are manufactured to a high degree of accuracy on high speed and high... Show More£34.80 Inc VAT £29.00 Exc VATIn stockPart No.2162
Tyres
-
Tyre 6.00 - 16 (3 Rib) suitable for John Deere tractorT-002 is an 8 ply, 3 rib pattern front tyre; widely found on many vintage and classic 2WD farm tractors such as John Deere, David Brown, Ferguson, Fordson, Massey Ferguson, Ford, and Case International.Fits rim size 4.50... Show More£57.00 Inc VAT £47.50 Exc VATIn stockPart No.T-002Tyre 7.50 - 16 (3 Rib) suitable for John Deere tractor Front 2WD tyre. Brand: ATF. 8 Ply.
Use With 2240 Rim And T-007 Inner Tube£71.99 Inc VAT £59.99 Exc VATIn stockPart No.T-003Inner Tubes
-
Inner Tube- Front 6.00 x 16 suitable for John Deere tractor Use with T-002 Tyre.
Use With 2162 Rim And T-006 Tyre
£11.99 Inc VAT £9.99 Exc VATIn stockPart No.T-006 -
Inner Tube- Front 7.50 x 16 suitable for John Deere tractor Use with T-003 Tyre.£15.00 Inc VAT £12.50 Exc VATIn stockPart No.T-007
Wheel & Tyre Assemblies
-
Wheel & Tyre Assembly 5.50 x 16 (7.50 x 16 Goodyear Tyre) suitable for John Deere tractor Contains: Wheel Rim (5.50 x 16) x 1 Tyre - Front Goodyear (7.50 x 16) x 1 Inner Tube (7.50 x16) x 1 Supplied fully assembled - finished in undercoat£210.00 Inc VAT £175.00 Exc VATIn stockPart No.22010
-
Wheel Rim 5.50 x 16 suitable for John Deere tractorFits tyre size - 7.50 x 16.For best fit use with Agriline tyre ref. T-003 7.50 x 16 and inner tube ref. T-007.Agriline wheels are manufactured to a high degree of accuracy on high speed and high... Show More£34.80 Inc VAT £29.00 Exc VATIn stockPart No.2240Wheel & Tyre Assembly 5.50 x 16 (7.50 x 16 Tyre) suitable for John Deere tractorAgriline will handle the hard work for you, saving you the time and effort of assembling your own wheels, or the expense and inconvenience of hiring a fitter. Our team of expert fitters build Agriline wheel assemblies in-house.
Show More £106.80 Inc VAT £89.00 Exc VATOut of stockPart No.22002Track & Drag Ends
-
Steering Joint (LH/RH) suitable for John Deere tractor Steering Joint (LH/RH)- Length (A): 208mm- Outer Thread Diameter(B): M24 x 1.5 RHT- Outer Thread Diameter (C): M22 x 1.5 RHTSupplied with Nut.£33.60 Inc VAT £28.00 Exc VATIn stockPart No.50526
-
Track Rod End suitable for John Deere tractor Length: 275mm. Rod/Thread: M28 x 1.5mm Right Hand. Taper: 23.5mm, 26.4mm. Suitable for APL 350 Standard Duty Axle. 3040, 3050, 3140, 3350, 3640, 3650.£90.00 Inc VAT £75.00 Exc VATIn stockPart No.50522
-
Track Rod End suitable for John Deere tractor Track Rod End- Lock Nut Thread Length (A): 29mm- Taper Diameter (B - C): From 23.5mm – 26.5mm- Outer Diameter (D): 42mm- Effective length (E): 269mm- Internal Thread Size (F): M28x1,5 R... Show More£90.00 Inc VAT £75.00 Exc VATIn stockPart No.50521Track Rod End suitable for John Deere tractor Length: 305mm. Rod/Thread: M24 x 1.5mm Right Hand. Taper: 23.5mm, 26.4mm. Suitable for APL 345 Standard Duty Axle. John Deere. 2140 - Upto Serial Number 024905. 3040 - Upto Serial Number 026316. 3140 - Upto Serial Number 026316.£76.16 Inc VAT £63.47 Exc VATIn stockPart No.50501Track Rod End suitable for John Deere tractor Track Rod End
- Lock Nut Thread Length (A): 20mm- Taper Diameter (B - C): From 18mm – 20.2mm- Outer Thread Diameter (D): N/A- Effective length (E): 80mm- Thread Size (F): M20 x 1 RHTShow More£62.04 Inc VAT £51.70 Exc VATIn stockPart No.50503Track Rod End - RH suitable for John Deere tractorTrack Rod End - RH- Lock Nut Thread Length (A): 29mm- Taper Diameter (B - C): From 23.5mm – 26.5mm- Outer Diameter (D): 42mm- Effective length (E): 295mm- Int... Show More£62.04 Inc VAT £51.70 Exc VATIn stockPart No.50504Track Rod End - RH suitable for John Deere tractor Length: 305mm. Rod/Thread: M24 x 1.5mm Right Hand. Taper: 23.5mm, 26.4mm. Suitable for APL 345 Standard Duty Axle. John Deere. 2140 - Upto Serial Number 024905. 3040 - Upto Serial Number 026316. 3140 - Upto Serial Number 026316.£80.74 Inc VAT £67.28 Exc VATIn stockPart No.50502Steering Joint suitable for John Deere tractorSteering Joint- Length (A): 246mm- Outer Thread Diameter(B): M28 x 1.5 RHT- Outer Thread Diameter (C): M30 x 1.5 RHTSupplied with Nut.
<... Show More£64.24 Inc VAT £53.53 Exc VATIn stockPart No.50525Axle Pin Subcom
-
Split Cotter Pin (20 Pack) suitable for John Deere tractor OD - 4mmWorking Length - 40mm£2.28 Inc VAT £1.90 Exc VATIn stockPart No.5716
Spindles
-
Spindle LH / RH suitable for John Deere tractor Shaft Length: 375mm.
Shaft Diameter: 44.5mm.£86.83 Inc VAT £72.36 Exc VATIn stockPart No.74583
Spindle Components
-
Bearing- 37.65 x 55.96 x 16.25mm suitable for John Deere tractor Bearing ID - 37.65 mm OD - 55.96 mm Width - 16.25 mm£6.18 Inc VAT £5.15 Exc VATIn stockPart No.52003
Wheel Hubs
-
Wheel Hub with Studs suitable for John Deere tractor Requires Wheel Bearing Kit, Agriline Ref. 1540.
Wheel Bearing Hole Diameter, Axle End: 90mm.
Wheel Bearing Hole Diameter, Hub Cap End: 68mm.£56.40 Inc VAT £47.00 Exc VATIn stockPart No.1551A
Wheel Bearings
-
Outer Wheel Bearing suitable for John Deere tractor 2WD Axle. 33.20mm x 68.20mm£11.88 Inc VAT £9.90 Exc VATIn stockPart No.9307
-
Wheel Bearing Kit suitable for John Deere tractor
For Hubs With Bolt On Hub Cap
£23.99 Inc VAT £19.99 Exc VATOut of stockPart No.1540
Hub Caps
-
Hub Cap suitable for John Deere tractor 3 Bolt Fixing£17.99 Inc VAT £14.99 Exc VATIn stockPart No.74319
Hub Components
-
Hub Oil Seal suitable for John Deere tractor OD: 89.6mm.
ID: 60.16mm.
Width: 6mm.£4.20 Inc VAT £3.50 Exc VATIn stockPart No.74562 -
Wheel Hub Gasket suitable for John Deere tractor
3 Bolt Fixing
£2.88 Inc VAT £2.40 Exc VATOut of stockPart No.74250 -
4WD Hub Bush suitable for John Deere tractor 46mm x 50mm x 30mm
£10.46 Inc VAT £8.72 Exc VATIn stockPart No.74869 -
Front Hub Seal suitable for John Deere tractor 136 x 165 x 13mm£25.48 Inc VAT £21.23 Exc VATIn stockPart No.75526
Steering Units
-
Orbital Steering Unit suitable for John Deere tractor Orbital Steering Unit£234.00 Inc VAT £195.00 Exc VATIn stockPart No.1548
Steering Wheels
-
Steering Wheel suitable for John Deere tractor Splined Centre.£19.80 Inc VAT £16.50 Exc VATIn stockPart No.1642
Steering Wheel Acc
-
Steering Wheel Woodruff Key suitable for John Deere tractor Steering Wheel Woodruff Key£1.20 Inc VAT £1.00 Exc VATIn stockPart No.5800
4WD Driveshaft
-
Drive Shaft Oil Seal suitable for John Deere tractor I.D: 46mm.
O.D: 65mm.
Thickness: 15.8mm.£9.90 Inc VAT £8.25 Exc VATIn stockPart No.80125 -
4WD Driveshaft Bearing suitable for John Deere tractor ZF Axle: APL315, APL325, APL345, APL350, APL1552, APL1551 34.2mm x 72.2mm x 26.6mm£17.99 Inc VAT £14.99 Exc VATIn stockPart No.9431
-
4WD Drive Shaft Bearing suitable for John Deere tractor ZF Axle: APL1351, APL1325, APL345, APL330, APL1351. 28.57 x 64.29 x 21.43£15.00 Inc VAT £12.50 Exc VATIn stockPart No.9429
-
King Pin suitable for John Deere tractor Up to Serial Number - 42999930MM Upper Diameter (Grease Nipple End)25MM Lower Diameter.49MM Mid Diameter60MM Overall Length£34.80 Inc VAT £29.00 Exc VATIn stockPart No.72206
Hub
-
4WD King Pin suitable for John Deere tractor 4WD King Pin
APL350 - After Year 1983£28.80 Inc VAT £24.00 Exc VATIn stockPart No.80171 -
4WD Inner & Outer Hub Bearing suitable for John Deere tractor ZF Axle: APL3052, APL1551 & APL1552. 63.5mm X 76.2 mm£29.90 Inc VAT £24.92 Exc VATIn stockPart No.9312
-
King Pin suitable for John Deere tractor Up to Serial Number - 42999930MM Upper Diameter (Grease Nipple End)25MM Lower Diameter.49MM Mid Diameter60MM Overall Length£34.80 Inc VAT £29.00 Exc VATIn stockPart No.72206
-